Ariens Hydro Pro 36 Owners Manual - Page 31

SERVICE PARTS Order the following parts through your Dealer: Part No. Description 00036800 Ariens Hi-Temp Grease (3x 3 oz cartridges) 00592900 Fuel Stabilizer (4 oz.) 21531100 Spark Plug 07200608 Impeller Belt (Set of 2) 07200631 Traction Belt (926053, 054, 055) 07200630 Traction Belt (926056) 52100100 Shear Bolt Kit 06400920 Gear Case Seal Washer ACCESSORIES See your authorized Ariens dealer to add the additional accessories available to your Sno-Thro. Part No. Description 72406500 Front Weight Kit 72406900 Slicer Bar 72600300 Composite Skid Shoes 72601500 Cover 72408000 Snow Cab PROBLEM Engine will not crank/start. Engine stops. Engine problems. TROUBLESHOOTING PROBABLE CAUSE CORRECTION 1. Fuel tank is empty. 2. Fuel shut-off valve closed. 3. Build up of dirt and residue around governor/carburetor. 4. Key Switch not in run position. 5. Ignition switch starter circuit not functioning. 6. Electric starter not functioning. 1. Fill fuel tank (see FILLING FUEL TANK on page 17). 2. Open fuel shut-off valve. 3. Clean area around governor/carburetor. 4. Put Key Switch into run position. 5. Check for a bad starter or connections. 6. Check for a bad starter or connections. 1. Out of fuel. 2. Fuel shut-off valve closed. 3. Mechanical jam in blower rake or impeller. 4. Polluted fuel supply. 5. Faulty spark plug. 6. Plugged fuel cap vent. 1. Fill fuel tank (see FILLING FUEL TANK on page 17). 2. Open fuel shut-off valve. 3. Turn off engine, remove key, and wait for all moving parts to stop. Check for and remove obstruction and repair before restart. 4. Replace with clean fuel. 5. Replace or clean spark plug. 6. Replace fuel cap. 1. See Engine Manual. 1. See Engine Manual. EN - 31