Ariens Lawn Edger Owners Manual - Page 7
ASSEMBLY, Assemble Handlebars - manual tool
View all Ariens Lawn Edger manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. Tools Required • 1/2" Wrench • Needle Nose Pliers Unpack Unit Remove unit and all other components from the shipping container. Push unit from container onto a level surface. Assemble Handlebars 1. Rotate handlebars into the operating position and secure with the bolts and lock nuts. 2. Connect the depth control rod to the cutting height lever and to the cutting depth adjuster with two hairpins. Check Engine Oil 1. Fill engine crankcase with oil. See engine manual. Check Engine Fuel 1. Fill fuel tank. DO NOT OVERFILL! See Check Engine Fuel on page 7. Check Safety Interlock System WARNING: Safety interlock failure and improper operation of unit can result in death or serious injury. Check system before each use to make sure it is functioning properly. See Operator Presence Control on page 9. Figure 3 GB - 7