Ariens Pro-24 HWM SP Owners Manual - Page 35

PROBLEM Wheel drive does not engage PROBABLE CAUSE 1. Wheel drive control not engaged. 2. Wheel drive belts tension too loose. 3. Wheel drive belt worn or damaged. 4. Wheel drive control linkage detached or broken. 5. Bearings damaged. 6. Drive seems to slip or speed is too slow. Inadequate traction on sloped terrain. 7. Wheel drive rollers run in reverse. CORRECTION 1. Engage wheel drive control. 2. Check wheel drive belts tension. Adjust as necessary (see BELT TENSION ADJUSTMENT on page 27). 3. Replace belt. (see BELT REPLACEMENT on page 30) 4. Check wheel drive control linkage. Adjust or replace as needed. See CHECK WHEEL DRIVE CONTROL The unit must stop quickly and completely when the control is released. Adjust or repair if necessary. See WHEEL DRIVE CONTROL ADJUSTMENT on page 32. on page 19. 5. Contact your Dealer. 6. See Wheel Drive Speed Adjustment on page 24. See Wheel Drive Traction Adjustment on page 25. 7. Install wheel drive lower belt in correct orientation. See Wheel Drive Lower Belt Replacement on page 30. SERVICE PARTS Always use genuine Ariens parts to keep your mower running like new. Description Part Number Air Filter 21535600 Pre-Cleaner, 04278300 Air Filter Spark Plug 04278500 Oil Filter 04278400 Blade 04159600 Wheel Drive 07200538 Upper Belt Wheel Drive 07206000 Lower Belt Mower Blade 07200537 Drive Belt ACCESSORIES See your authorized Ariens Dealer to add these optional accessories. 71106800 Mulching Kit, 24" 71106900 Front Swivel Wheel Kit 71107000 High-Traction Rear Tire Kit GB - 35