Ariens Professional 36 Owners Manual - Page 15
Discharge Chute Control, Differential Lock
View all Ariens Professional 36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Discharge Chute Control (Figure 12) IMPORTANT: If chute does not stay in set position, adjust as directed in Discharge Chute Control on page 25, or repair before operation. Rotate the Chute with Discharge Chute Control (Figure 12). Differential Lock Knob 1 Figure 12 OS7105 IMPORTANT: DO NOT force frozen chute controls. If frozen, take to warm place until controls are free. Differential Lock (926041, 042, 043) (Figure 13) The differential can be locked for maximum traction or unlocked to allow for easier turning. The differential lock knob is located on the right Track Assembly. With the differential locked power is applied equally to both tracks. To engage the differential lock: Pull and turn knob to LOCKED (1) position and release (knob will snap in place when positioned correctly). To release the differential lock: Pull and turn knob to the UNLOCKED (2) position and release (knob will be positioned out slightly from unit when positioned correctly). 2 Figure 13 Heated Handles 1 2 OS1950 Turn the heated handles switch to the ON (1) position to activate. Turn the switch to the OFF (2) position to deactivate. Scraper Blade The scraper blade allows better contact with the surface being cleared. It also prevents damage to the housing from normal usage. IMPORTANT: DO NOT allow Scraper Blade to wear too far or Auger/Impeller housing will become damaged. Skid Shoes The skid shoes control the distance between the scraper blade and the ground. Adjust skid shoes equally to keep blade level with the ground. Refer to Pre-Start on page 17 for recommended settings. GB - 15