Ariens Professional 36 Owners Manual - Page 33

STORAGE WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. SHORT TERM IMPORTANT: NEVER spray unit with high pressure water or store unit outdoors. Run with attachment clutch engaged a few minutes after each use to free unit of any loose or melting snow. Close fuel shut-off valve. Inspect unit for visible signs of wear, breakage or damage. Keep all nuts, bolts and screws properly tightened and know unit is in safe working condition. Store unit in a cool, dry protected area. LONG TERM Clean unit thoroughly with mild soap and low pressure water and lubricate (see MAINTENANCE on page 20). Touch up all scratched painted surfaces. Remove weight from wheels by putting blocks under frame or axle. Fuel System Gasoline left in the fuel system for extended periods without a stabilizer will deteriorate, resulting in gum deposits in the system. These deposits can damage the carburetor and the fuel hoses, filter and tank. Prevent deposits from forming in the fuel system during storage by adding a quality fuel stabilizer to the fuel. Follow the recommended mix ratio found on the fuel stabilizer container. To treat the fuel system for storage: 1. Add fuel stabilizer (Ariens p/n 00592900) according to manufacturers' instructions. 2. Run engine for at least 10 minutes after adding stabilizer to allow it to reach the carburetor. NEVER store the engine with fuel in the fuel tank inside of a building with potential sources of ignition. SERVICE PARTS Order the following parts through your Dealer: Part No. Description 00036800 Ariens Hi-Temp Grease (3, 3 oz cartridges ) 00592900 Fuel Stabilizer (4 oz.) 21534100 Spark Plug 07200430 Impeller Belt 07200110 Traction Belt 00170800 Friction Disc 52100100 Shear Bolt Kit ACCESSORIES See your authorized Ariens dealer to add the additional accessories available to your Sno-Thro. Part No. Description 72406500 Front Weight Kit 72406900 Slicer Bar 72600300 Composite Skid Shoes 72600200 Cover 72408000 Snow Cab 72600500 Track Drive Conversion Kit (926037, 038, 039, 040, 104, 105) 82600100 Brush Attachment Kit (926037, 038, 039, 040) GB - 33