Arlo Audio Arlo Doorbell Pro 2 System Quick Start Guide - Page 15
Connect the doorbell battery, cover to your existing chime
View all Arlo Audio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connect the doorbell battery cover to your existing chime a. Turn off the power to your current doorbell at the breaker. b. Remove your current doorbell. c. Connect the wires coming out of the wall to the terminals on the back of the Arlo doorbell battery cover with the screws we provide. If the wires are too short, use the accessories we provide. Battery cover Wire screw Current doorbell wires from your wall (Either wire can connect to either terminal.) 15
15
Wire screw
Battery cover
Current doorbell wires
from your wall
(Either wire can connect
to either terminal.)
Connect the doorbell battery
cover to your existing chime
a.
Turn off the power to your current
doorbell at the breaker.
b.
Remove your current doorbell.
c.
Connect the wires coming out of the
wall to the terminals on the back of
the Arlo doorbell battery cover with
the screws we provide.
If the wires are too short, use the
accessories we provide.