Asko D5436XLS Installation instructions EN - Page 9

PREPARING THE DISHWASHER FOR INSTALLATION At this point the styrofoam, plastic wrap, and the wood pallet (base) should be removed from the dishwasher. Now is an excellent time to inspect for any shipping damage. Should you find any damage, you should report it to your dealer or builder immediately. Be sure to remove the toe kick and toe kick insulation (only on certain models) from the top of the dishwasher. Be sure to remove the transport protection for the door when unpacking the dishwasher. ATTACH THE LIGHT SHIELDING FILM (Only certain models.) Attach the light shielding film (packed in the document bag) to the underside of the countertop above the touch buttons. 1 2x SLIDES FOR LEGS Use caution when sliding the dishwasher into place. The protective slides could cause damage to certain types of soft flooring. NOTE: The surface on which the protective film is to be attached must be clean and dry. ATTACH THE SUPPLIED DOOR SEALING (Only certain models.) This strip is an essential part of the Turbo Dry Express system and must be installed to ensure an optimum seal between the dishwasher tank and door. 1 2 2 MOVING THE MACHINE INTO PLACE As you do this, feed the drain line and inlet hose into the access hole(s) in the side of the cabinet. Use caution when sliding the dishwasher into place. The protective slides could cause damage to certain types of soft flooring. WARNING! Be careful of sharp edges. CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM 9