Asko D5534 User manual 8090782 Asko D5534 XXL FI EN - Page 16
Asko D5534 Manual
View all Asko D5534 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Dishwashing 6 Select options To select an option, press one of the option buttons. The field under the button lights when the option is activated. The available options depend on the selected program. Once you have started the program, the options you selected are saved for the next time you use the same program. An exception is the Delayed start option. 2. Press Start/Stop and the dishwasher counts down 1 hour at a time and starts after the selected delay. Press and hold Start/Stop for three seconds if you want to cancel the Delayed start option. NOTE! Remember to press the Start/Stop button to start the program. High temperature Activate this option for improved dishwashing results. The machine then uses a higher temperature for the main wash. If you want to use the lower temperature, press again so that the field under the button turns off. You can vary the temperature as shown below: 7 Press Start/Stop and close the door The display flashes three times with the remaining time to indicate that the program has started. Close the door properly, otherwise the dishwasher will not start. The display indicates if the door is open. NOTE! Heavy: Normal: Daily: Quick: 130 °F (55 °C)/ 160 °F (70 °C) 130 °F (55 °C)/ 150 °F (65 °C) 140 °F (60 °C)/ 150 °F (65 °C) 85 °F (30 °C)/ 140 °F (60 °C) If the machine does not start within 2 minutes of the last button press, the display returns to showing the last program run. Stopping or changing a program If you want to change programs after starting the dishwasher, open the door then press and hold Start/Stop for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then choose a new program, press Start/Stop, and close the door. Super Quick: 85 °F (30 °C)/ 140 °F (60 °C) Delicate: Eco: 105 °F (40 °C)/ 120 °F (50 °C) 120 °F (50 °C)/ 140 °F (60 °C) Do you want to add more dishes? Long dry A higher temperature in the final rinse and a longer drying phase improves the drying result if you activate the Long dry option. This causes a slight increase in energy consumption. This option can be used with all programs except Rinse & Dry and Rinse & Hold. If you want a program with Short dry, press again so that the field under the button turns off. Open the door. The dishwasher stops automatically. Add the dishes, close the door, and the dishwasher resumes the program. If the dishwasher is turned off using the main power switch or due to a power failure If the program was not finished, the interrupted program resumes when power is restored. NOTE! During drying, the program is interrupted if the power is cut or the door is open for more than 2 minutes. Delayed start When you select Delayed start, the dishwasher will start 1-24 hours after you press the Start/Stop button. 1. Press the button once to activate Delayed start. Press the button several times - or hold it in - to set the desired number of hours. 16 Customer Care Center 1-800-898-1879 www.askousa.com