Asko D5538 User manual 8093940 Asko D5538 XL FI EN - Page 16
Select options, Press Start/Stop and close
View all Asko D5538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Dishwashing 6Select options To select an option, press one of the option buttons. The field under the button lights when the option is activated. The available options depend on the selected program. Once you have started the program, the options you selected are saved for the next time you use the same program. An exception is the Delayed start option. High temperature Activate this option for improved dishwashing results. The machine then uses a higher temperature for the main wash. If you want to use the lower temperature, press again so that the field under the button turns off. You can vary the temperature as shown below: Heavy: 130 °F (55 °C)/ 160 °F (70 °C) Normal: 130 °F (55 °C)/ 150 °F (65 °C) Daily: 140 °F (60 °C)/ 150 °F (65 °C) Quick: 85 °F (30 °C)/ 140 °F (60 °C) Super Quick: 85 °F (30 °C)/ 140 °F (60 °C) Delicate: 105 °F (40 °C)/ 120 °F (50 °C) Eco: 120 °F (50 °C)/ 140 °F (60 °C) Long dry A higher temperature in the final rinse and a longer drying phase improves the drying result if you activate the Long dry option. This causes a slight increase in energy consumption. This option can be used with all programs except Rinse & Dry and Rinse & Hold. If you want a program with Short dry, press again so that the field under the button turns off. Delayed start When you select Delayed start, the dishwasher will start 1-24 hours after you press the Start/Stop button. 1. Press the button once to activate Delayed start. Press the button several times - or hold it in - to set the desired number of hours. 2. Press Start/Stop and the dishwasher counts down 1 hour at a time and starts after the selected delay. Press and hold Start/Stop for three seconds if you want to cancel the Delayed start option. NOTE! Remember to press the Start/Stop button to start the program. 7Press Start/Stop and close the door The display flashes three times with the remaining time to indicate that the program has started. Close the door properly, otherwise the dishwasher will not start. The display indicates if the door is open. NOTE! If the machine does not start within 2 minutes of the last button press, the display returns to showing the last program run. Time remaining Once you have selected a program and options, the display indicates how long the program took the last time it was used. The remaining time is updated after the water for the final rinse has been heated. This may differ somewhat from time to time depending on the temperature of the water supply, the amount of dishes, the ambient temperature, and other factors. NOTE! During the first run of each program, the remaining time displayed can be slightly misleading, as the dishwasher is estimating the time. When you run the program a second time, the dishwasher will calculate the remaining time based on the previous duration of the program. 16 Customer Care Center 1-800-898-1879 www.askousa.com