Asko D5538 User manual 8093940 Asko D5538 XL FI EN - Page 24

Troubleshooting Display Type of fault Overfilling Action Call the Customer Care Center. Water outlet fault Water inlet fault See "Water remains in the dishwasher above the filters" in the table below. Check that the water supply valve is on. Inlet valve leakage Turn off the water supply valve and call the Customer Care Center. Turn off the machine with the main power switch and then turn it on again to clear the error message from the display. Problem Possible causes Action The dishes are not clean. The spray arms do not rotate. Remove the arms and clean them. Check that the dishes are not blocking the spray arms. Detergent is too old. Detergent is a per- Avoid large packages. ishable product. Incorrect detergent dosage. Dose according to water hardness. Far too much or far too little detergent can result in poor dishwashing results. Dishwashing program too weak. Select a higher temperature or a more powerful program. Dishes loaded incorrectly. Do not cover dishes with large bowls or lids. Avoid placing very tall glasses in the corners of the baskets. Glasses and cups have toppled over Load the dishes securely. during the program. The filter is not correctly fitted. Screw the filter firmly into place. See the section Care and maintenance instructions. Spots or films on the dishes. Incorrect rinse aid dosage setting. See the sections Rinse aid and Settings. Too high temperature and/or too much Wash crystal at a low temperature and detergent can cause etching on crystal. with a conservative amount of detergent. Unfortunately, this cannot be repaired, Contact the detergent manufacturer. only prevented. The dishes have a sticky white/blue film. Rinse aid dosage setting too high. Reduce the amount. See the sections Rinse aid and Settings. If you have very soft water, you may want to dilute the rinse aid 50:50 with water. Spots on stainless steel or silver. Some types of food, such as mustard, Rinse off these types of food if not mayonnaise, lemon, vinegar, salt, and starting the dishwasher immediately. Or dressings, can cause spots on stainless why not run the Rinse & Hold program? steel if left for too long. All stainless steel can cause spots on Silver and stainless steel items should silver if they come into contact during not come into contact during dishwashdishwashing. Aluminum can also cause ing. spots on dishes. 24 Customer Care Center 1-800-898-1879 www.askousa.com