Asko D5636XXLHS/PH Installation instructions EN - Page 3
Twarning
View all Asko D5636XXLHS/PH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
SAFETY INSTRUCTIONS • It is important that you closely follow the instructions provided here. • An incorrect or defective installation can lead to higher consumption of energy, water and dishwashing detergent, which can lead to higher costs and poor cleaning results. • Plumbing and electrical installations must be carried out by qualified professionals. • Exercise caution during the installation! Wear protective gloves! Always work in pairs! • The power outlet for the dishwasher should be installed in a location that is easily accessible once the dishwasher is installed. • Always follow the applicable regulations for water, drain and electrical connection. • If a dishwasher must be hard wired, it must be connected to a grounded circuit. WARNING! Turn off the water supply when installing the dishwasher! BEFORE STARTING THE INSTALLATION Connection to water supply: • There must be a shut off valve on the water supply pipe. The shut off valve should be installed in a location that is easily accessible so that the water may be shut off in the event that the dishwasher needs to be moved. Installation advice: • Cable holes for wires/cables need not be larger than 1-1/2˝ (38 mm). • Attach the light shielding film (see FITTING THE DISHWASHER IN PLACE). Only select models. NOTE: Check that the fitting and connection measurements are correct. See UNIT DIMENSIONS and PREPARING THE LOCATION. XXL/XL? XXL See page 4 [mm] ? XL See page 5 XL / XXL CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM 3