Asko D5893 User manual Use & Care Guide Asko D5893 EN - Page 24
Drain pump
View all Asko D5893 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Drain pump The pump can be accessed from inside the machine. 1. Cut the power to the machine by pulling out the plug! 2. Remove the coarse filter and pipe section. 3. Remove the small fitted piece at the left of the bottom drain (see the image below). If the machine still does not start and a buzzing sound is heard, the overflow guard has been activated. • Shut off the water. • Pull the plug out from the wall socket. • Call the service division. NOTE! Do not forget to reinstall the fitted piece. 4. You can release and turn the pump blade by inserting your finger into the hole and release anything blocking it. 5. Reinstall the fitted piece and filters. 6. Plug the plug into the wall socket. The spray arms Holes and bearings can sometimes become blocked. 1. Pull the lower washer arm straight up to release it. 2. Remove any deposits using a needle or similar. The washer arms also have holes under neath. Customer Care Center 24 1-800-898-1879 www.askousa.com