Asko D5893 User manual Use & Care Guide Asko D5893 EN - Page 28
Troubleshooting - dishwasher parts
View all Asko D5893 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Troubleshooting Problems Possible causes Action The dishes are not clean • The spray arms are not rotating • Lift off the arms and clean • Old dishwasher detergent. Note! Detergent is perishable • Avoid large packs • Incorrect dosage of detergent • Dispense according to the level of water hardness • Wrong wash program selected • Heavier programs are longer, and use higher temperatures for dirtier loads. Use a heavier program better suited for the load • Incorrect loading of the dish- • Do not cover china with large washer bowls or the like • Try not to place too much tall glassware in the corners of the baskets • Glasses and cups have tipped • Load the china securely over during the wash • Filter not correctly positioned • Screw the filter into place Stains or a film on the china The china has a whitishblue sticky film • Incorrectly set rinse aid dispenser • See the chapter on rinse aid • Phosphate-free detergent in • Change detergent combination with hard water • Too high a temperature and/or too much detergent can cause etching on(crystal) glass. Unfortunately this cannot be remedied, only prevented! • Wash (crystal) glass at a low temperature and use dishwasher detergent sparingly. Contact the dishwasher detergent manufacturer • Too high dosage of rinse aid • Reduce dosage. See the chapter on rinse aid. If the water is very soft, you could try diluting the rinse aid with water (1 part rinse aid, 1 part water) Customer Care Center 28 1-800-898-1879 www.askousa.com