Asko T702 User manual Use & Care Guide Asko T702 EN - Page 15

Troubleshooting The machine will not start Check • that the door is properly closed. • that the main power switch is on. • that any plug is connected. • that the fuses (circuit breakers) in your house are intact. Flip the dryer breaker off and then back on to make sure. You can not always tell from the outside if the circuit breaker has tripped. • that the overheating cut-off has not been triggered (see below). Overheating cut-off The overheating cut-off shuts off the tumble dryer if the temperature is too high, caused by lint clogging the lint filter, for instance. • Clean the filter. • The overheating cut-off will reset automatically once the machine has cooled down. Drying takes too long • Check that the lint filter is not clogged (see the "Care and maintenance" chapter). The laundry does not dry, or is too dry • The door has been opened while the program is running, which disrupts the moisture monitoring function. Error messages • If the lights to the right of the Start/Stop button are flashing, the maximum permitted program time has been reached. Read "Drying takes too long" in the "Troubleshooting" chapter to find out what to do. Customer Care Center 15 1-800-898-1879 www.askousa.com