Asko T702C User manual Use & Care Guide Asko T702C EN - Page 13

Operating instructions 7Drying program finished Important! • Clean the lint filter after each load. Caution! If the lint filter becomes clogged, the machine's automatic overheating cut-off may be triggered. In order to be able to restart the machine, you must clean the filter and allow the machine to cool down for around 30 minutes. Cleaning the lint filter 1. Grasp the filter handle and pull it toward you. 2. Pull the filter out of its holder. To install the automatic drain hose, please see the section titled Installation 8Once drying has finished Turn off the main power switch. Remove the clothes and close the door to prevent small children from climbing into the machine. 2 1 3. Open the filter and remove the lint by hand. 4. Fold the filter up and insert it into its holder. The filter may need to be cleaned if it has limescale deposits. See the "Care and cleaning" chapter. Customer Care Center 13 1-800-898-1879 www.askousa.com