Asko T754C User manual 8095056 Asko T754C EN - Page 21

Installation instructions be sure that the tumble dryer is correctly positioned on the washing machine. Break off tab A on the cup fitted on the right side and tab B on the cup fitted on the left side. Then remove the paper from the self-adhesive surface under the plastic cups. AA BB 5. Fit the plastic cups so that the "tags" marked with arrows are against the front edge or side edge of the cover and press them firmly onto the cover. Then break off the remaining tabs. 8. Lower the tumble dryer's front feet into the plastic cups and adjust the tumble dryer to ensure it is level. 6. Push out the knock-out hole on the back of the tumble dryer (you don't have to completely remove the knockout, just fold it up far enough for the stacking bracket to fit inside the slot) using a hammer and a screwdriver. Adjusting the feet Screw the feet in or out so that the tumble dryer is both stable and level. Built-in 7. Push the tumble dryer in under the metal brackets. At the same time keep the front edge raised by 7/16" (10mm) to 7/8" (20mm) . Customer Care Center 21 1-800-898-1879 www.askousa.com