Asko T760 User manual Use & Care Guide T760-T780 (Use & Care Guide - E - Page 13

Stacked Inst, Cked Installa, Allation

Page 13 highlights

ENGLISH STACKED INSTALLATION ASKO dryers can be mounted on top of any matching ASKO washer. Mounts are supplied with the machine. Two metal brackets for securing the dryer to the washer Two plastic cups to secure the dryer legs. To install the dryer on top of the washer, follow the steps below: 1. Remove the two outside screws (20 torx) from the back of the washer and use them to secure the metal brackets, as illustrated. 5. Lift the dryer into position. Raising the front edge, push the dryer backwards until it engages with the brackets on the back of the washer. 6. Carefully lower the front of the dryer, making sure the feet fit into the plastic cups. Washer back Metal brackets 2. To ensure the dryer is correctly positioned on top of the washer, align the plastic cups with the front top edge of the washer. Plastic cups To position the plastic cups, break off the left tab (A) on the cup to be placed on the right side of the washer and break off the right tab (B) on the cup to be placed on the left side of the washer. 3. Remove the protective paper from the self- adhesive surface beneath the cups. Being careful not to press the adhesive surface against the top of the washing machine, use the tabs to position the cups (as illustrated) then press them firmly into place. 4. Once the cups are in place, break off the remaining plastic tabs. Stacked Installation Tumble dryer Washer Total height 67". Adjustable to 69". WARNING! Never stack a washer on top of a dryer! Page 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Page 13
ENGLISH
ENGLISH
ST
STACKED INST
CKED INSTALLA
ALLATION
TION
ASKO dryers can be mounted on top of any matching
ASKO washer. Mounts are supplied with the machine.
Two metal brackets for
securing the dryer to
the washer
Two plastic cups to
secure the dryer legs.
To install the dryer on top of the washer, follow the steps
below:
1. Remove the two outside screws (20 torx) from the
back of the washer and use them to secure the metal
brackets, as illustrated.
2.
To ensure the dryer is correctly positioned on top of
the washer, align the plastic cups with the front top
edge of the washer.
3. Remove the protective
paper from the self-
adhesive
surface
beneath the cups. Being
careful not to press the
adhesive surface against
the top of the washing
machine, use the tabs to
position the cups (as illustrated) then press them
firmly into place.
4.
Once the cups are in place, break off the remaining
plastic tabs.
5. Lift the dryer into
position. Raising the
front edge, push the
dryer backwards until it
engages
with
the
brackets on the back of
the washer.
To position the plastic cups, break off the left tab (A)
on the cup to be placed on the right side of the washer
and break off the right tab (B) on the cup to be placed
on the left side of the washer.
Washer
back
Tumble dryer
Washer
Metal brackets
6.
Carefully lower the front
of the dryer, making sure
the feet fit into the plastic
cups.
Stacked Installation
WARNING!
Never
stack a washer on top of a dryer!
Total height 67”.
Adjustable to 69”.
Plastic cups