Asko T760 User manual Use & Care Guide T760-T780 (Use & Care Guide - E - Page 8

NAVIGATING THE MENUS The following paragraphs explain how to navigate through the menus and change the preset programs. If you don't want to make changes in all of the menus, continue to press MENU until the one you do want to change displays. To restore a preset program to its original settings, simply press the button for the preset program (P1-P4) you want to restore and hold it down while you press ENTER. The program will instantly revert to its original settings. We recommend that you make two or three trial changes to understand how easy it is to customize these program. Remember, the first step to customizing a preset program is to press the button for the program you want to customize (P1-P4). The Program Menu The Program menu lets you set the dry program you prefer. You would also use this menu to set the machine for a Timed Dry or Air Fluff program. (See "Timed Dry and Air Fluff" on this page.) Select Program Extra dry < Next > P1 M enu E n te r 1. Use the Arrow buttons to move through the program choices (Extra Dry, Dry, Normal Dry, etc.) 2. When your preference displays, press ENTER. The LED will display the new program setting. Press MENU to advance to the next menu or press START to begin the program. The Options Menu This menu lets you set several options (such as, turning the buzzer off and on, setting the anti-crease run time, etc.) Only the options available with the program you selected will display. (See "The Program Menu" on page 7.) Select options Normal Cooling < Next > P1 M enu E n te r 1. On this menu, you press ENTER to advance through the options, rather than pressing MENU. 2. Press an Arrow button to toggle between Off and On. 3. When your preference displays, press ENTER. The LED will display the new options. Press MENU to advance to the next menu or press START to begin the program. Page 8 The Temperature Menu This menu lets you set the dry temperature. Only the temperatures available for the dry program you selected will display. Select temperature Temperature low < Next > P1 M enu E n te r 1. Use the Arrow buttons to toggle between the Normal and Low temperature settings. 2. When the setting you prefer displays, press ENTER. The LED will display the new temperature setting. Press MENU to advance to the next menu or press START to begin the program. Timed Dry and Air Fluff When you select Timed Dry or Air Fluff on the program menu, the word "Time" and a number (of minutes) will flash in the upper right corner of the LED window. This indicates you must select a program time (5 to 90 minutes). Select time < Next > P1 M enu Time 60 E n te r 1. To change the number, simply press an Arrow button until the length of time you want the program to run displays. 2. Press ENTER to program your change. Press MENU to advance to the next menu or press START to begin the program. When you press START, the time remaining for the program to run displays in the bottom right-hand corner of the LED window, as illustrated below: Air fluff progr. Anti-Crease 1h Air fluff Time 60 30 M enu E n te r NOTE: The remaining time toggles between the minutes remaining (e.g., 23) and the hour(s) remaining (e.g., 1h).