Asko W6222 User manual Use & Care Manual Asko W6222 EN - Page 27

Troubleshooting Error messages The display indicates whether an error has occurred during the program. After taking the measures described below, turn off the machine to exit error message mode. The error messages that may be shown are: The door is not closed If the first red field beside the Start/Stop button is flashing, you have tried to start a program with the door open. Close the door and the program will start. Over filling If F1 is flashing on the display. 1. Shut off the water tap. 2. Contact the Customer Care Center at the number listed at the bottom of this page! Drainage error If F3 is flashing on the display, there is a drainage problem. Check: • that no objects are stuck in the drainage hose outlet. • that the drain pump is not blocked by for- eign objects. Clean the pump (see the "Care and cleaning" chapter). • that there are no kinks in the drainage hose. After taking the necessary action, run the Drain program or press the Door Opening button (key symbol) to empty the machine. If the problem persists, contact the Customer Care Center at the number listed at the bottom of this page! Water intake error If F4 is flashing on the display. Fault with water supply. Check: • that the tap on the water pipe is open. • that the filter in the machine's water intake is not blocked. 1. Shut off the water tap. 2. Unscrew the hose. 3. Clean the filter in the intake valve on the machine. 4. Screw the hose back on. 5. Turn on the tap. 6. Run the program again to check whether the error has been fixed. 7. If the problem persists, contact the Cus- tomer Care Center at the number listed at the bottom of this page! Door opening error If F6 is flashing on the display. Contact the Customer Care Center at the number listed at the bottom of this page! Customer Care Center 27 1-800-898-1879 www.askousa.com