Asus A8V Deluxe A8V User Manual - Page 47
ASUS A8V Deluxe motherboard, RAID Serial ATA connectors 7-pin SATA_RAID1, SATA_RAID2 - sata setup
View all Asus A8V Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5. RAID Serial ATA connectors (7-pin SATA_RAID1, SATA_RAID2) These Serial ATA connectors support SATA hard disks that you can configure as a RAID set. Through the onboard Promise® PDC20378 RAID controller, you can create a RAID 0, RAID 1,or RAID 0+1 configuration together with the RAID ATA133 connector (PRI_RAID). SATA_RAID1 GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND ® A8V A8V Deluxe SATA RAID Connectors GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND SATA_RAID2 • By default, the RAID connector is set as RAID. If you want to use it as an independent drive, set the Operation Mode to IDE Mode under the Advanced menu. • To create a RAID set, make sure that you have connected the Serial ATA cable and installed Serial ATA devices. You cannot enter the SATARaid™ utility and SATA BIOS setup during POST if no Serial ATA device is connected. • The Promise® PDC20378 RAID controller does not support ATAPI devices such as CD-ROMs, DVD-ROMs, etc. • Refer to section "5.6.2 Promise® RAID Configurations" for details on SATA RAID configuration. ASUS A8V Deluxe motherboard 2-25