Asus AAM6010EV-T4 User Manual - Page 8
New Hardware Installation Options, Browse for Folder - m usb driver
View all Asus AAM6010EV-T4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
AAM6010EV-T4 User Manual 3.2 Configuring Your PC Before you start to access the CPE via Ethernet, you must configure your PC's TCP/IP address to be 192.168.1.x, where x is any number between 2 and 254. The subnet mask must be 255.255.255.0. Your CPE's default IP address is 192.168.1.1. If you use Ethernet cable to connect your AAM6010EV-T4 and PC, you don't need any specific driver installation and you can skip this section 3.2.1. But if you use USB cable under Windows operation system, you should install provided USB driver as soon as you plug the USB cable to your PC. Detail steps are described in 3.2.1 Windows® USB Driver Installation 3.2.1 Windows® USB Driver Installation 1. As soon as you connect the USB cable between your PC and AAM6010EV-T4, your Windows will detect a new hardware and the Wizard will pop-up. Choose "Install from a list or specific location" from its menu and then click "Next" (Figure 3.1). Figure 3.1 Found New Hardware Wizard 2. Insert the supplied CD and use "Browse" to include this location in the search (Figure 3.2 & Figure 3.). Figure 3.2 New Hardware Installation Options Figure 3.3 Browse for Folder 8 8