Asus AW1500-S5 PP-DLW User Manual - Page 46
Hardware information, Chassis alarm lead 4-1 pin J23, SMBus connector 6-1 pin J16
View all Asus AW1500-S5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4. Chassis alarm lead (4-1 pin J23) This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins. J23 +5Volt (Power Supply Stand By) Chassis Signal Ground PP-DLW PP-DLW Chassis Open Alarm Lead 5. SMBus connector (6-1 pin J16) This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. SMBus is a specific implementation of an I2C bus, a multi-device bus that allows multiple chips to connect to the same bus and enable each one to act as a master by initiating data transfer. PP-DLW PP-DLW SMBus Connector J16 1 FLOATING SMBCLK Ground SMBDATA +5V 2-20 Chapter 2: Hardware information