Asus B150M-PLUS D3 User Guide - Page 26
Internal connectors, B150M-PLUS D3 Fan connectors - cpu support
View all Asus B150M-PLUS D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1.7.2 Internal connectors 1. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM PIN 1 RXD DTR DSR CTS DCD TXD GND RTS RI B150M-PLUS D3 B150M-PLUS D3 Serial port (COM) connector The COM module is purchased separately. 2. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN 1/2) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector A B CPU_FAN CHA_FAN1 CPU FAN PWM CPU FAN IN CPU FAN PWR GND +5V CHA FAN IN CHA FAN PWR GND B150M-PLUS D3 A B C CHA_FAN2 C +5V CHA FAN IN CHA FAN PWR GND B150M-PLUS D3 Fan connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan of maximum 1A (12 W) fan power. 1-16 Chapter 1: Product introduction