Asus B85M-E B85M-E User's Manual - Page 67

Option ROM Messages [Force BIOS], Interrupt 19 Capture [Disabled], Setup Mode [EZ Mode], CSM - / csm

Page 67 highlights

2.8.5 Option ROM Messages [Force BIOS] [Force BIOS ROM [Keep Current ROM 2.8.6 Interrupt 19 Capture [Disabled] ROMがInterrupt 19 Disabled] [Enabled] 2.8.7 Setup Mode [EZ Mode] [Advanced Mode] [EZ Mode] UEFI BIOS Utility Advanced Mode UEFI BIOS Utility EZ Mode 2.8.8 CSM (Compatibility Support Module) CSM (Compatibility Support Module UEFI Launch CSM [Enabled] [Auto Enabled] CSM Windows® UEFI UEFI Disabled] Security Firmware UpdateとSecure Boot CSMを Launch CSM」を[Enabled Boot Devices Control [UEFI and Legacy OpROM UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only] Boot from Network Devices [Legacy OpROM first Ignore Legacy OpROM first] [UEFI driver first] [Ignore] Boot from Storage Devices [Legacy OpROM first Ignore Both, Legacy OpROM first] [Both, UEFI first] [Legacy OpROM first] [UEFI driver first] [Ignore] Boot from PCIe/PCI Expansion Devices [Legacy OpROM first PCI Express/PCI Legacy OpROM first] [UEFI driver first] ASUS B85M-E 2-37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

ASUS B85M-E
2-37
2.8.5
Option ROM Messages [Force BIOS]
[Force BIOS]
サードパーティのROMメッセージをブートシーケンス時に強制的に表示させ
ます。
[Keep Current]
アドオンデバイスの設定に従い、サードパーティROMメッセージを表示させます。
2.8.6
Interrupt 19 Capture [Disabled]
この設定を有効にすることで、オプションROMがInterrupt 19をトラップできるようになります。
(シ
ステムへの起動割り込み)
設定オプション: [Disabled] [Enabled]
2.8.7
Setup Mode [EZ Mode]
[Advanced Mode]
UEFI BIOS Utility起動時の初期画面として、Advanced Mode を表示します。
[EZ Mode]
UEFI BIOS Utility起動時の初期画面として、EZ Mode を表示します。
2.8.8
CSM (Compatibility Support Module)
CSM (Compatibility Support Module)のパラメータ設定です。この設定によってUEFIドライバー
を持たないデバイスとの互換性を向上することが可能です。
Launch CSM [Enabled]
[Auto]
システムは自動的に起動可能デバイスと追加デバイスを検出します。
[Enabled]
CSMを有効にし、Windows® UEFIモード、またはUEFIドライバーを持たない追
加デバイスを完全にサポートし互換性を高めます。
[Disabled]
Security Firmware UpdateとSecure Bootを完全にサポートするためにCSMを
無効にします。
次の項目は、「
Launch CSM
」を[
Enabled
]に設定することで表示されます。
Boot Devices Control [UEFI and Legacy OpROM]
起動を許可するデバイスタイプを選択します。
設定オプション: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]
Boot from Network Devices [Legacy OpROM first]
起動に使用するネットワークデバイスの優先タイプを選択します。起動時間を短縮する場合は
[
Ignore
] を選択します。
設定オプション: [Legacy OpROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OpROM first]
起動に使用するストレージデバイスの優先タイプを選択します。起動時間を短縮する場合は
[
Ignore
] を選択します。
設定オプション: [Both, Legacy OpROM first] [Both, UEFI first] [Legacy OpROM first]
[UEFI driver first] [Ignore]
Boot from PCIe/PCI Expansion Devices [Legacy OpROM first]
起動に使用するPCI Express/PCI 拡張デバイスの優先タイプを選択します。
設定オプション: [Legacy OpROM first] [UEFI driver first]