Asus B85M-G PLUS USB 3.1 User Guide - Page 30
B85M-G PLUS/USB3.1 Chassis intrusion connector, Chassis intrusion connector 4-1 pin CHASSIS
View all Asus B85M-G PLUS USB 3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
12. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS B85M-G PLUS/USB3.1 B85M-G PLUS/USB3.1 Chassis intrusion connector +5VSB_MB Chassis Signal GND 1-20 Chapter 1: Product introduction
1-20
Chapter 1: Product introduction
12.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusion sensor or switch sends a high-level signal to this connector when a chassis
component is removed or replaced. The signal is then generated as a chassis intrusion
event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
B85M-G PLUS/USB3.1
B85M-G PLUS/USB3.1 Chassis intrusion connector
+5VSB_MB
Chassis Signal
GND
CHASSIS