Asus C1241QSB User Guide - Page 20
Turning on the monitor
View all Asus C1241QSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
a. Plug one end of the VGA/HDMI/DP cable to the monitor's VGA/HDMI/ DP jack. b. Connect the other end of the VGA/HDMI/DP cable to your computer's VGA/HDMI/DP jack. c. Tighten the two screws to secure the VGA connector. • To connect the audio cable: connect one end of the audio cable to the monitor's line in port, the other end to the computer's audio-out port. • To use the earphone: connect the end with plug type to the monitor's line out port when an HDMI/DP signal is fed. • To use the USB 2.0 ports (C1241QSB only): Take an USB 2.0 cable, and plug the smaller end (type B) of the USB upstream cable to the monitor's USB upstream port, and the larger end (type A) to your computer's USB 2.0 port. Make sure your computer is installed with the lastest Windows 7/Windows 8.1/ Windows 10 operating system. That will enable the USB ports on the monitor to work. When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu. 2.5 Turning on the monitor Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON. 2-6 Chapter 2: Setup