Asus C1241QSB User Guide - Page 28
Adaptive-Sync/FreeSync DisplayPort and HDMI only
View all Asus C1241QSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5. Image Set the image related setting from this menu. Image ASUS C1241 Standard Mode HDMI 1920 x 1080 @ 60Hz Sharpness Trace Free Aspect Control VividPixel ASCR Adaptive-Sync Position More • Sharpness: The adjusting range is from 0 to 100. • Trace Free: Adjusts the response time of the monitor. • Aspect Control: Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan. 4:3 is only available when input source is in 4:3 format. OverScan is only available for the HDMI input source. • VividPixel: Enhances the outline of the displayed picture and generates high-quality images on screen. • ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function. • Adaptive-Sync/FreeSync (DisplayPort and HDMI only): Allows an Adaptive-Sync/FreeSync supported* graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update. * Adaptive-Sync/FreeSync (DisplayPort and HDMI only) can only be activated within 48Hz ~ 75Hz. * For supported GPUs, minimum PC system and driver requirements, please contact the GPU manufactures. • Position (Only available for VGA input): adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100. • Focus (Only available for VGA input): reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100. • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. • Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional. • Auto Adjust.: Automatically adjusts the image to its optimized position, clock, and phase (for VGA mode only). 3-6 Chapter 3: OSD (On-Screen Display) menu