Asus DSBF-D12 SAS User Guide - Page 36
CPU, then connect the fan cable to the 4-pin connector labeled CPU_FAN2.
View all Asus DSBF-D12 SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2. Use a Phillips screwdriver to tighten the four heatsink screws in a diagonal sequence. 3. Connect the fan cable to the 4‑pin connector labeled CPU_FAN1. Do not forget to connect the CPU fan cable! Hardware monitoring errors may occur if you fail to plug this connector. CPU_FAN1 connector 4. Repeat steps 1 to 3 to install the other heatsink if you have installed a second CPU, then connect the fan cable to the 4‑pin connector labeled CPU_FAN2. 2-14 Chapter 2: Hardware information
2-14
Chapter 2: Hardware information
2.
Use a Phillips screwdriver to tighten
the four heatsink screws in a
diagonal sequence.
4.
Repeat steps 1 to 3 to install the other heatsink if you have installed a second
CPU, then connect the fan cable to the 4-pin connector labeled CPU_FAN2.
Do not forget to connect the CPU
fan cable! Hardware monitoring
errors may occur if you fail to plug
this connector.
3.
Connect the fan cable to the 4-pin
connector labeled CPU_FAN1.
CPU_FAN1
connector