Asus DSBF-D12 SAS User Guide - Page 62
away the cable from the connector
View all Asus DSBF-D12 SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
To connect the mini-SAS cable: Plug in the mini-SAS cable to the mini-SAS connector until the cable lock snaps in place. To disconnect the mini-SAS cable: 1. With your thumb, push down the cable lock to release. 2. While still keeping your thumb's grip on the cable lock, carefully pull away the cable from the connector 1 2 6. USB connector (10-1 pin USB34) This connector is for USB 2.0 ports. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed. ® Power USB PortB(-) USB PortB(+) GND NC Power USB PortA(-) USB PortA(+) GND USB34 PIN1 DSBF-D12 Series USB connector The USB port module is purchased separately. 2-40 Chapter 2: Hardware information