Asus Designo MX259HS MX259HS Series User Guide - Page 19

4. Image You can adjust Sharpness, Trace Free, Aspect Control, ASCR, Position (VGA only), and Focus (VGA only) from this menu. MX259 Splendid Sharpness 60 Blue Light Filter Trace Free 60 Color Image Aspect Control Full ASCR OFF Input Select Position System Setup Focus Move Menu Exit • Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100. • Trace Free: Use this function to speed up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100. • Aspect Control: adjust the aspect ratio to full, 4:3 or OverScan. • 4:3 is only available when input source is in 4:3 format. • OverScan is only available for the HDMI input source. • ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function. • Position: Adjust the horizontal postition (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 (only available for VGA input). • Focus: Reduce the Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100. • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. • Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional. 3-5 Chapter 3: General Instruction