Asus E3 PRO GAMING V5 E3 PRO GAMING V5 Users manual English - Page 16
E3 PRO GAMING V5 motherboard memory Qualified Vendors Lists QVL, DDR4 3200 MHz O.C. capability - overclock
View all Asus E3 PRO GAMING V5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • According to Intel® CPU spec, DIMM voltage below 1.35V is recommended to protect the CPU. • Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: - Use a maximum of 3 GB system memory if you are using a 32-bit Windows® OS. - Install a 64-bit Windows® OS if you want to install 4GB or more on the motherboard. - For more details, refer to the Microsoft® support site at http://support.microsoft. com/kb/929605/en-us. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory frequency adjustment. • Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. E3 PRO GAMING V5 motherboard memory Qualified Vendors Lists (QVL) DDR4 3200 MHz (O.C.) capability Vendors Part No. Size SS/DS Chip Brand Chip NO. Timing DIMM socket support Voltage (Optional) 1 DIMM 2 DIMMs 4 DIMMs PANRAM PUD43200C164G4NJW 4G SS N/A Heat-Sink Package 16-18-18-39 1.35V • • • MUSHKIN 997202F 4G SS N/A Heat-Sink Package 16-16-16-36-50 1.35V • • • G.SKILL F4-3300C16Q-16GRKD 4G SS N/A Heat-Sink Package 16-16-16-36 1.35V • • • ADATA AX4U3333W4G16-QGZ 4G SS N/A Heat-Sink Package 161-16-16 1.35V • • • GEIL GLWR416GB3400C16AQC 4G SS N/A Heat-Sink Package 16-18-18-36 1.35V • • • G.SKILL F4-3400C16Q-16GRBD 4G SS N/A Heat-Sink Package 16-18-18-38 1.35V • • • G.SKILL F4-3466C16Q-16GVK 4G SS N/A Heat-Sink Package 16-18-18-38 1.35V • • • CORSAIR CMD16GX4M4B3466C18 4G SS N/A Heat-Sink Package - 1.35V • • • G.SKILL F4-3600-C17Q-16GVK 4G SS N/A Heat-Sink Package 17-18-18-38 1.35V • • • DDR4 3000 MHz (O.C.) capability Vendors KINGSTON G.SKILL TEAM TEAM PANRAM KINGSTON Part No. Size HX430C15PB2K4/16 4G F4-3000C15Q-16GRR 4G TCD48G3000C16ABK 8G TCD44G3000C16ABK 4G PUD43000C154G4NJW 4G HX430C15PBK4/32 8G SS/DS SS SS DS SS SS DS Chip Brand Chip NO. N/A Heat-Sink Package N/A Heat-Sink Package TEAM T4D5128HT-30 TEAM T4D5128HT-30 N/A Heat-Sink Package N/A Heat-Sink Package Timing 15-15-15-35 16-16-16-36 16-16-16-36 15-17-17-35 15-16-16-39-65 Voltage 1.35V 1.35V 1.35V 1.35V 1.35V 1.35V DIMM socket support (Optional) 1 DIMM 2 DIMMs 4 DIMMs • • • • • • • • • • • • • • • • • • 1-8 Chapter 1: Product introduction