Asus E500-PIB CUSL2-M User Manual - Page 20
ASUS CUSL2-M User's Manual, Onboard Audio CODEC Setting AUD_EN1, Onboard AC97 Audio Controller,
View all Asus E500-PIB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. HARDWARE SETUP 4) Onboard Audio CODEC Setting (AUD_EN1) (available on audio model only) The onboard audio CODEC may be enabled or disabled using all of these jumpers. Disable the onboard audio CODEC if you are using an ISA or PCI audio card on any of the expansion slots or a primary audio/modem CNR on a CNR slot (see CNR Slot later in this section). If using a PCI audio expansion card, Onboard AC97 Audio Controller in 4.4.2 I/O Device Configuration must also be disabled. Setting Enable Disable AUD_EN1 [1-2] (default) [2-3] 3. H/W SETUP Motherboard Settings 5) Onboard LAN Setting (LAN_EN) The onboard LAN may be enabled/disabled with this jumper. Setting LAN_EN Enable Disable [1-2] (default) [2-3] CUSL2-M ® CUSL2-M On Board Lan Setting LAN_EN 12 Enable (default) 23 Disable 20 ASUS CUSL2-M User's Manual