Asus EX-H610M-V3 D4-CSM EX-H610M-V3 D4 Users Manual English - Page 11

USB+5V USB_P9USB_P9+ GND NC USB+5V USB_P14USB_P14+ GND 8. USB 2.0 header The USB 2.0 header allows you to connect a USB module for additional USB 2.0 ports. The USB 2.0 header provides data transfer speed of up to 480 Mb/s. PIN 1 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. 9. Clear CMOS header This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. +3V_BAT GND CLRTC PIN 1 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS Setup to reenter data. If the steps above do not help, remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery. AGND NC SENSE1_RETUR SENSE2_RETUR 10. Front Panel Audio header This header is for a chassis-mounted front panel audio I/O module that supports HD audio standard. Connect one end of the front panel audio I/O module cable to this header. PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L • We recommend that you connect a high-definition front panel AAFP audio module to this header to avail of the motherboard's highdefinition audio capability. • If you want to connect a high-definition front panel audio module to this header, set the Front Panel Type item in the BIOS Setup to [HD Audio]. By default, this header is set to [HD Audio]. HD-audio-compliant pin definition 11. Speaker header The 4-pin header is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER +5V GND GND Speaker Out PIN 1 ASUS EX-H610M-V3 D4 1-3