Asus GP-105 ASUS GP-105 QSG Quick Start Guide for Americas - Page 1

GP-105 5-Port Gigabit Switch with 4-port PoE Quick Start Guide Package Contents • ASUS PoE switch x 1 • Mounting bracket x 2 • Rubber foot x 4 • Power cord x 1 • Screw x 8 • Quick Start Guide x 1 NOTE: Contact your dealer or retailer if any of the items is damaged or missing. Q10693 / First Edition / July 2015 NA10693_GP-105_QSG.indd 1 Specifications Setting up GP-105 Port 1-5 comply with: 1. IEEE 802.3 2. IEEE 802.3u 3. IEEE 802.3ab 10/100/1000 base-T LAN 4. IEEE 802.3az 5. Support Half/Full-Duplex operations 6. Auto-negotiation 7. Auto MDI/MDIX 8. Supports IEEE 802.3x Flow Control (Full-Duplex mode) PoE Standard IEEE 802.3af/at Maximum PoE Power Supply 80W Maximum PoE Power Supply Per Port 30W Gigabit Port 5 (port 1-5) PoE Port Switching Capability MAC Address table size Packet Buffer memory Wire speed on all ports and port options Priority Queue Forwarding Mode AC Input DC Output Dimension Weight Operating Temperature Operation Humidity 4 (port 1-4) 10 Gbps 2K 1M bit Full-wire speed (full-duplex) operation on all GE ports 8 queues Store and Forward 100V ~ 240V, 50/60Hz 54V, 2A 180mm x 230mm x 44 mm (7" x 9" x 1.7") 840 g (1.85 lbs) 0°c - 40°c (32°f - 104°f) 20~ 80%, non-condensing 1. Installing the switch. 1.1 On a desktop a. Peel the adhesive backing paper from the four rubber feet. b. A ttach the rubber feet to the four recessed areas on bottom of GP-105. c. Place the GP-105 on a flat surface. 1.2 In a rack a. Before installation, ensure that the rack is stable. NOTE: GP-105 is compatible with the standard 19" EIA racks. b. Attach the mounting brackets to the GP-105 with the screws that came with the package. LED Indicators 2. Connecting your devices. a. Connect one end of the power cable to GP-105 and the other end to a power outlet. The power LED and system LED turn to solid green. b. C onnect your devices to PoE ports 1~4 with RJ-45 cables. The switch automatically provides power to 802.3at/af-compliant PoE devices. c. Insert an RJ-45 cable to the Gigabit port of the GP-105 to connect it to your existing network (via modem, router, hub, or access point). IP cam WPS WiFi Wi-Fi Access Point Internet VoIPs c. Secure the brackets to the rack with suitable screws, which are not included in the package. 3. Checking LEDs. GP-105 supplies 30W power per PoE port and a total of 80W power across all four ports. Check the status of LEDs on the front panel for the remaining power budget. LED Descriptions Power LED System LED PoE Power Budget Left LED for Gigabit port 1-5: Link/Act Right LED for Gigabit port 1-4: PoE status Color Solid Green Solid Green Solid Amber Blinking Amber Solid Green Solid Amber Blinking Amber Solid/Blinking Green Solid/Blinking Amber Solid Green Solid Amber Amber Blinking Status Power on System OK Running Power-On-Self-Test PoE failed 20W to 80W PoE power budget remaining. 15.4W to 20W PoE power budget remaining. Less than 15.4W PoE power budget remaining. Link established at 1000 Mbps. The LED blinks when transmitting and receiving data. Link established at 10/100 Mbps. The LED blinks when transmitting and receiving data. The PoE power output is less than 15.4W The PoE power output is greater than 15.4W but less than 30W The PoE power output is requested over 30W 2015-08-27 13:47:38