Asus H61M-C H61M-C User's Manual - Page 29

H61M-C USB device wake-up - bios

Get Asus H61M-C PDF manuals and user guides View all Asus H61M-C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

2. PS2 and USB device wake-up (3-pin PS2_USBPW1~4) This jumper allows you to enable or disable the PS2 ports and USB ports 1~4 wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer using a PS2 or USB device. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. This jumper is for the rear USB ports. PS2_USBPW1~4 12 23 H61M-C +5V +5VSB (Default) H61M-C PS2/USB device wake-up 3. USB device wake-up (3-pin USBPW5~10) Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). USBPW5~10 12 23 +5V +5VSB (Default) H61M-C USB device wake-up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. ASUS H61M-C 1-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
2.
PS2 and USB device wake-up (3-pin PS2_USBPW1~4)
This jumper allows you to enable or disable the PS2 ports and USB ports 1~4 wake-up
feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer
using a PS2 or USB device. This feature requires an ATX power supply that can supply
at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. This jumper is
for the rear USB ports.
3.
USB device wake-up (3-pin USBPW5~10)
Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
•
The USB device wake-up feature requires a power supply that can provide 500mA on
the +5VSB lead for each USB port; otherwise, the system would not power up.
•
The total current consumed must NOT exceed the power supply capability (+5VSB)
whether under normal condition or in sleep mode.
H61M-C
H61M-C PS2/USB device wake-up
PS2_USBPW1~4
2
1
2
3
+5V
+5VSB
(Default)
H61M-C USB device wake-up
2
1
2
3
+5V
(Default)
+5VSB
USBPW5~10
ASUS H61M-C
1-17