Asus H61M-E H61M-E User's Manual - Page 32
H61M-E USB device wake-up - bios
View all Asus H61M-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
12 23 2. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the keyboard. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. KBPWR +5V +5VSB (Default) H61M-E H61M-E Keyboard power setting 3. USB device wake-up (3-pin USBPW1-4, 3-pin USBPW5-10) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). USBPW1-4 12 23 +5V +5VSB (Default) USBPW5-10 H61M-E 12 23 +5V +5VSB (Default) H61M-E USB device wake-up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 1-20 Chapter 1: Product introduction