Asus H87M-PLUS H87M-PLUS User's Manual - Page 32
USB2.0 connectors
View all Asus H87M-PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5. USB 2.0 connectors (10-1 pin USB910; USB1112; USB1314) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480Mbps connection speed. USB910 USB1112 USB1314 USB+5V USB_P9USB_P9+ GND NC USB+5V USB_P11USB_P11+ GND NC USB+5V USB_P13USB_P13+ GND NC H87M-PLUS PIN 1 PIN 1 PIN 1 USB+5V USB_P10USB_P10+ GND USB+5V USB_P12USB_P12+ GND USB+5V USB_P14USB_P14+ GND H87M-PLUS USB2.0 connectors Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! • The USB 2.0 module is purchased separately. • These connectors are based on xHCI specification. We recommend you to install the related driver to fully use the USB 2.0 ports under Windows® 7 or later operating systems. 6. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. +5V SPDIFOUT GND Chapter 1 H87M-PLUS SPDIF_OUT H87M-PLUS Digital audio connector The S/PDIF module is purchased separately. 1-18 Chapter 1: Product introduction