Asus H97M-E User Guide - Page 20

Jumpers, IRQ assignments for this motherboard

Page 20 highlights

IRQ assignments for this motherboard PCIEx16_1 PCIEx1_1 PCIEx1_2 PCIEx1_3 LAN USB2.0 controller 1 USB2.0 controller 2 USB 3.0 controller HD audio SATA controller 1 SATA controller 2 A B C D EFG H shared - - - - - - - - - - shared - - - - shared - - - - - - - - shared - - - - - - - - shared - - - - - - - - - - - - shared - - - - shared - - - - - - - - shared - - - - - - - - shared - - - - shared - - - - - - - shared - - - - 1.6 Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. H97M-E CLRTC 12 23 Normal (Default) H97M-E Clear RTC RAM Clear RTC To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5-10 seconds, then move the cap back to pins 1-2. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to reenter data. Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure! 1-10 Chapter 1: Product introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

IRQ assignments for this motherboard
A
B
C
D
E
F
G
H
PCIEx16_1
shared
PCIEx1_1
shared
PCIEx1_2
shared
PCIEx1_3
shared
LAN
shared
USB2.0 controller 1
shared
USB2.0 controller 2
shared
USB 3.0 controller
shared
HD audio
shared
SATA controller 1
shared
SATA controller 2
shared
1.6
Jumpers
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing the
CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <
Del
> key during the boot process and enter BIOS setup to re-
enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
H97M-E
H97M-E Clear RTC RAM
1
2
2
3
Normal
(Default)
Clear RTC
CLRTC
1-10
Chapter 1: Product introduction