Asus H97M-E User Guide - Page 23
Internal connectors, H97M-E Fan connectors
View all Asus H97M-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1.7.2 Internal connectors 1. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM PIN 1 RXD DTR DSR CTS DCD TXD GND RTS RI H97M-E H97M-E Serial port (COM) connector The COM module is purchased separately. 2. CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CHA_FAN2 GND CHA FAN PWR CHA FAN IN CHA FAN PWM CPU FAN PWM CPU FAN IN CPU FAN PWR GND H97M-E CHA_FAN1 GND CHA FAN PWR CHA FAN IN CHA FAN PWM H97M-E Fan connectors DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • Only the 4-pin CPU fan supports the ASUS FAN Xpert 2+ feature. ASUS H97M-E 1-13