Asus J3455I-CM-A users manual in English - Page 36
Serial Port 1 Configuration, Parallel Port Configuration
View all Asus J3455I-CM-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Change Settings [IO=3F8h; IRQ=4] Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] Serial Port 1 Configuration The sub-items in this menu allow you to set the serial port configuration. Serial Port [On] Allows you to enable or disable the serial port (COM). Configuration options: [On] [Off] Change Settings [IO=3F8h; IRQ=4] Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] Parallel Port Configuration The sub-items in this menu allow you to set the parallel port configuration. Parallel Port [On] Allows you to enable or disable the parallel port (LPT/LPTE). Configuration options: [On] [Off] Change Settings [Auto] Allows you to select an optimal setting for Super I/O devices. Configuration options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5, 6, 7, 9, 10, 11, 12;] [IO=278h; IRQ=5, 6, 7, 9, 10, 11, 12;] [IO=3BCh; IRQ=5, 6, 7, 9, 10, 11, 12;] Device Mode [STD Printer Mode] Allows you to select the Printer Port mode. Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode] 3.4.3 APM ErP Ready [Disabled] Allows BIOS to switch off some power at S4/S5 to get the system ready for ErP requirement. When enabled, all other PME options will be switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore AC Power Loss [Power Off] [Power On] The system goes into on state after an AC power loss. [Power Off] The system goes into off state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system state was before the AC power loss. Power On By PCI-E [Disabled] [Disabled] Disables the PCI-E devices to generate a wake-on-LAN feature of the Intel®/Realtek LAN device. [Enabled] Enables the PCI-E devices to generate a wake-on-LAN feature of the Intel®/ Realtek LAN device. Chapter 3: BIOS setup 3-9