Asus KGNH-D16 User Guide - Page 70
OnChip SATA Channel [Enabled], SATA Port1-Port4 [IDE]
View all Asus KGNH-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4.3.4 Storage Configuration The items in this menu allow you to set or change the configurations for the IDE/SATA devices installed in the system. Select an item then press if you wish to configure the item. Main BIOS SETUP UTILITY Storage Configuration OnChip SATA Channel [Enabled] SATA Port1- Port4 [IDE] SATA Port5- Port6 [IDE] Options Disabled Enabled ←→ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. OnChip SATA Channel [Enabled] Configuration options: [Disabled] [Enabled] SATA Port1-Port4 [IDE] Allows you to set the SATA configuration. [IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [RAID] Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives. [AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. SATA Port5-Port6 Setting this item to [IDE] instead of [RAID] or [AHCI] allows the system to recognize the optical drives connected to the SATA connectors 5 or 6 when installing OS. If SATA Port1-Port4 is set to [IDE], SATA Port5-Port6 can only be configured as [IDE] 4-12 Chapter 4: BIOS setup