Asus M2A-MVP M2A-MVP English Edition User's Manual - Page 89
Installing hard disks - windows 7 drivers
UPC - 610839148028
View all Asus M2A-MVP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
2.9.1 Installing hard disks The motherboard supports Ultra DMA 133/100/66 and Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. Installing Serial ATA (SATA) hard disks To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal cables. 3. Connect a SATA power cable to the power connector on each drive. 2.9.2 ULI® RAID configurations The ULI® RAID controller supports RAID 0, RAID 1, RAID 0+1, RAID 5, and JBOD configurations. Use the ULI® RAID BIOS Setup utility to configure a disk array. You may also set the RAID configurations in Windows® OS after you have installed the Serial ATA RAID driver. See section 3.2.4 Make Disk menu for details. Entering the ULI® RAID BIOS Setup Utility To enter the ULI® RAID BIOS setup utility: 1. Boot up your computer, and press during POST to enter the BIOS setup. 2. In the Main Menu, go to Storage Configuration, and set the Onboard SATA Boot ROM item to [Enabled]. 3. Press to save the changes and exit. 4. Reboot your computer. 5. During POST. press The RAID BIOS setup screens shown in this section are for reference only, and may not exactly match the items on your screen. ASUS M2A-MVP 2-41