Asus M2R32-MVP Motherboard Installation Guide - Page 51

• For a fully-configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 400 W. • Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up. • The ATX 12 V Specification 2.0 compliant (500 W) PSU has been tested to support the below configuration: CPU: Memory: Graphics card: Hard disk: ATAPI: AMD FX-62 512 MB DDR (x4) PCI Express x16 ATI X850 SATA HD (x2) CD-ROM (x1) • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you want to use the ATI CrossFire™ Graphics solution, use a PSU with 500 ~ 600 W power to ensure system stability. 7 . IEEE 1394a connector (10-1 pin IE1394_2) This connector is for the IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis. ® +12V TPB2+ GND TPA2+ M2R32-MVP 1 IE1394_2 M2R32-MVP IEEE 1394 connector GND +12V TPB2GND TPA2- NEVER connect a U S B c a b l e to the IEEE 1394a connector. Doing so will damage the motherboard! The IEEE 1394a module cable is purchased separately. ASUS M2R32-MVP 2-29