Home » Asus Manuals » Motherboards » Asus M4A785-M » Manual Viewer

Asus M4A785-M User Manual - Page 37

Serial ATA connectors 7-pin SATA1-6 - motherboard manual

UPC - 610839172863

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

3. Serial ATA connectors (7-pin SATA1-6) These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the standard parallel ATA with 133 MB/s (Ultra DMA133). If you install Serial ATA hard disk drives, you can create RAID 0, RAID 1, and RAID 0+1 configurations through the onboard SB710 chipset. • Install the Windows® XP Service Pack 1 or later versions before using Serial ATA. • If you intend to create a Serial ATA RAID set using these connectors, set the type of the SATA connectors in the BIOS to [RAID]. See section 2.3.4 SATA Configuration for details. • The motherboard does not provide a floppy disk drive connector. You could use a USB floppy disk drive when installing Windows® XP operating system on a hard disk drive that includes a RAID/AHCI set. • Due to Windows® XP limitation, Windows® XP may not recognize the USB floppy disk drive. • For more details on RAID/AHCI, refer to the RAID/AHCI Supplementary Guide included in the folder named Manual in the support DVD. ASUS M4A785-M 1-25

Section	Page
Notices	6
Safety information	7
About this guide	8
M4A785-M specifications summary	10
Chapter 1	13
Product introduction	13
1.1 Welcome!	13
1.2 Package contents	13
1.3 Special features	13
1.3.1 Product highlights	13
1.3.2 Innovative ASUS features	15
1.4 Before you proceed	17
1.5 Motherboard overview	18
1.5.1 Placement direction	18
1.5.2 Screw holes	18
1.5.3 Motherboard layout	19
1.5.4 Layout contents	19
1.6 Central Processing Unit (CPU)	20
1.6.1 Installing the CPU	20
1.6.2 Installing the heatsink and fan	22
1.7 System memory	23
1.7.1 Overview	23
1.7.2 Memory configurations	24
1.7.3 Installing a DIMM	29
1.7.4 Removing a DIMM	29
1.8 Expansion slots	30
1.8.1 Installing an expansion card	30
1.8.2 Configuring an expansion card	30
1.8.3 PCI slots	30
1.8.4 PCI Express x1 slot	30
1.8.5 PCI Express x16 slot	30
1.9 Jumpers	31
1.10 Connectors	32
1.10.1 Rear panel ports	32
1.10.2 Internal connectors	35
1.11 Software support	42
1.11.1 Installing an operating system	42
1.11.2 Support DVD information	42
Chapter 2	43
BIOS information	43
2.1 Managing and updating your BIOS	43
2.1.1 ASUS Update utility	43
2.1.2 ASUS EZ Flash 2	44
2.1.3 ASUS CrashFree BIOS	45
2.2 BIOS setup program	46
2.2.1 BIOS menu screen	47
2.2.2 Menu bar	47
2.2.3 Navigation keys	47
2.2.4 Menu items	48
2.2.5 Submenu items	48
2.2.6 Configuration fields	48
2.2.7 Pop-up window	48
2.2.8 Scroll bar	48
2.2.9 General help	48
2.3 Main menu	49
2.3.1 System Time	49
2.3.2 System Date	49
2.3.3 Primary IDE Master/Slave, SATA 1~6	49
2.3.4 SATA Configuration	50
2.3.5 System Information	51
2.4 Advanced menu	51
2.4.1 JumperFree Configuration	51
2.4.2 CPU Configuration	54
2.4.3 Chipset	55
2.4.4 Onboard Device Configuration	56
2.4.5 PCIPnP	57
2.4.6 USB Configuration	57
2.5 Power menu	58
2.5.1 Suspend Mode	58
2.5.2 ACPI 2.0 Support	58
2.5.3 ACPI APIC Support	58
2.5.4 APM Configuration	58
2.5.5 HW Monitor Configuration	59
2.5.6 Anti Surgy Support	59
2.6 Boot menu	60
2.6.1 Boot Device Priority	60
2.6.2 Boot Settings Configuration	60
2.6.3 Security	61
2.7 Tools menu	62
2.7.1 ASUS EZ Flash 2	62
2.7.2 Express Gate	63
2.7.3 AI NET 2	63

Match case Limit results 1 per page

Serial ATA connectors (7-pin SATA1-6)

These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk

and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA

1.5Gb/s speciﬁcation. The data transfer rate of the Serial ATA 3Gb/s is faster than the

standard parallel ATA with 133 MB/s (Ultra DMA133). If you install Serial ATA hard

disk drives, you can create RAID 0, RAID 1, and RAID 0+1 conﬁgurations through the

onboard SB710 chipset.

• Install the Windows

XP Service Pack 1 or later versions before using Serial ATA.

•

If you intend to create a Serial ATA RAID set using these connectors, set the type of

the SATA connectors in the BIOS to

[RAID]

. See section

2.3.4 SATA Conﬁguration

for

details.

•

The motherboard does not provide a ﬂoppy disk drive connector. You could use a USB

ﬂoppy disk drive when installing Windows

XP operating system on a hard disk drive

that includes a RAID/AHCI set.

• Due to Windows

XP limitation, Windows

XP may not recognize the USB ﬂoppy disk

drive.

•

For more details on RAID/AHCI, refer to the RAID/AHCI Supplementary Guide included

in the folder named Manual in the support DVD.

ASUS M4A785-M

1-25