Asus M4A78LT PLUS User Manual - Page 50

CPU Q-Fan Function [Enabled] Enables or disables the CPU Q-Fan control feature. Configuration options: [Disabled] [Enabled] The following item appears only when you set CPU Q-Fan Function to [Enabled]. CPU Fan Speed Low Limit [200 RPM] Allows you to manually set a lower limit for the CPU fan speed. If the CPU fan speed is below the specified limit, the system sends out warning beeps. Configuration options: [500 RPM] [400 RPM] [300 RPM] [200 RPM] [100 RPM] [Ignored] CPU Q-Fan Mode [Standard] This item appears only when you enable the CPU Q-Fan Function feature and allows you to set the appropriate performance level of the CPU fan. [Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on the CPU temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation. [Turbo] Set to [Turbo] to achieve maximum CPU fan speed. [Manual] Allows you to individually set the CPU fan parameters. 2.5.6 [Disabled] [Enabled] EuP Ready [Disabled] Disables the Energy Using Products (EuP) Ready function. Allows BIOS to switch off some power at S5 state to get system ready for the EuP requirement. When set to [Enabled], power for WOL, WO_USB, audio and onboard LEDs will be switched off at S5 state. 2.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the sub-menu. Main Advanced Boot Settings M4A78LT PLUS BIOS Setup Power Boot Tools Exit Boot Device Priority Boot Settings Configuration Security Version 0202 Specifies the Boot Device Priority sequence. A virtual floppy disk drive (Floppy Drive B:) may appear when you set the CD-ROM drive as the first boot device. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2011, American Megatrends, Inc. 2-18 Chapter 2: BIOS information