Asus M4A79T Deluxe U3S6 User Manual - Page 53
Chassis intrusion connector 4-1 pin CHASSIS
View all Asus M4A79T Deluxe U3S6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
10. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. Chapter 2 ASUS M4A79T Deluxe 2-33
ASUS M4A79T Deluxe
2-33
Chapter 2
10.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of
the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch
sends a high-level signal to this connector when a chassis component is removed or replaced. The
signal is then generated as a chassis intrusion event.
By default , the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove
the jumper caps only when you intend to use the chassis intrusion detection feature.