Asus MAXIMUS FORMULA SE Motherboard Installation Guide - Page 43
Memory configurations - maximus formula special edition manual
View all Asus MAXIMUS FORMULA SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2.4.2 Memory configurations You may install 256 MB, 512 MB, 1 GB, and 2 GB unbuffered ECC and non‑ECC DDR2 DIMMs into the DIMM sockets. Recommended Memory Configurations Mode Single-Channel Dual-channel (1) Dual-channel (2) DIMM_A1 Populated - Populated Populated Sockets DIMM_A2 DIMM_B1 - - - Populated - Populated Populated Populated DIMM_B2 - - - Populated • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • If you install four 1 GB memory modules, the system may only recognize less than 3GB because the address space is reserved for other critical functions. This limitation appears on Windows® XP/Vista 32-bit operation system which does not support Physical Address Extension (PAE). • If you install Windows® XP/Vista 32-bit operation system, a total memory of less than 3GB is recommended. • This motherboard does not support memory modules made up of 128 Mb chips. Notes on memory limitations • Due to chipset limitation, this motherboard can only support up to 8 GB on the operating systems listed below. You may install a maximum of 2 GB DIMMs on each slot. 64-bit Windows® XP Professional x64 Edition Windows® Vista x64 Edition • Some old-version DDR2-800 DIMMs may not match Intel®'s On‑Die‑Termination (ODT) requirement and will automatically downgrade to run at DDR2-667. If this happens, contact your memory vendor to check the ODT value. • Due to chipset limitation, DDR2-800 with CL=4 will be downgraded to run at DDR2-667 by default setting. If you want to operate with lower latency, adjust the memory timing manually. ASUS Maximus Formula (Special Edition) / Maximus Formula 2-17