Asus ML229H User Guide - Page 14

In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100. 3. Image You can adjust the image Sharpness, Trace Free,Aspect Control,ASCR, Position (VGA only), and Focus (VGA only) from this main function. ML229 Splendid Sharpness 50 Color Trace Free 0 Image Aspect Control Full Input Select ASCR System Setup Position Focus Move Menu Exit • Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100. • Trace Free: Speed up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100. • Aspect Control: Adjust the aspect ratio to "Full", "4:3", or "Over Scan" (Only available for HDMI input). • ASCR:Turns on/off the ASCR (ASUS Smart Conrtast Ratio) function. • Position: Adjust the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100 . • Focus: Reduce Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100 . Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional. 3-3 Chapter 3: General Instruction