Asus P1-P5945GCX User Manual - Page 78
Graphic Adapter Priority [PCI/Int-VGA], Internal Graphics Mode Select [Enabled, 8MB], Graphics
View all Asus P1-P5945GCX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
5.4.4 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press to display the sub-menu. Advanced Chipset Settings Configure DRAM Timing by SPD DRAM Frequency [Enabled] [Auto] Graphic Adapter Priority [PCI/Int-VGA] Internal Graphics Mode Select [Enabled, 8MB] Graphic Memory Type [Auto] Enable or disable Configure DRAM Timing by SPD Configure DRAM Timing by SPD [Enabled] Allows you to enable or disable configure DRAM timing by SPD. Configuration options: [Disabled] [Enabled] DRAM Frequency [Auto] Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [DDR2-400MHz] [DDR2-533 MHz] [DDR2-667 MHz] Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. Graphic Adapter Priority [PCI/Int-VGA] Allows selection of the graphics controller to use as primary boot device. Configuration options: [Internal VGA] [PCI/Int-VGA] Internal Graphics Mode Select [Enabled, 8MB] Sets the internal graphics mode. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB] Graphics memory type [Auto] Sets the graphics memory type. Configuration options: [Auto] [DVMT] [FIX] [DVMT+FIX] 5-24 Chapter 5: BIOS setup