Asus P2B-D P2B-D User Manual - Page 13
Jumper Settings - p2b ds motherboard manual
View all Asus P2B-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
III. INST ALLATION Motherboard Settings III. INSTALLATION Jumper Settings 1. Clear Real Time Clock (RTC) RAM (CLRTC) The CMOS RAM is powered by the onboard button cell battery. To clear the RTC data: (1) Turn off your computer and unplug its AC power, (2) Short the two solder points labeled CLRTC, (3) Turn on your computer, (4) Hold down during bootup and enter BIOS setup to re-enter user preferences. 1 R 1 Short the solder points to clear CMOS P2B-D/DS Real Time Clock RAM (CLRTC) 2. Keyboard Power Up (KBPK) This allows you to disable or enable the keyboard power up function. Set to Enable if you want to use your keyboard (by pressing ) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead and the new ACPI BIOS support. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not function if you set this to Enable and if you do not have the right ATX power supply. 123 Disable (Default) 123 Enable 1 R 1 P2B-D/DS Keyboard Power Up ASUS P2B-D/P2B-DS User's Manual 13